Zokop Mini Split Remote Control Manual ✦ Must Try

| Problem | Likely Cause | Solution | |---------|---------------|----------| | No response from unit | Dead batteries | Replace AAA batteries | | Unit responds erratically | Wrong mode / code | Remove batteries, press power button 3x, reinsert | | Display shows “C” but want “F” | Temperature scale | Press ▲ + ▼ together for 3 sec (or remove/reinsert batteries while holding MODE) | | Timer not working | Incorrect setting | Cancel timers, re-set with unit on/off as required | | Remote works but unit doesn’t | IR blocked / distance | Point remote directly at indoor unit within 5 m | | Swing doesn’t stop | Swing mode active | Press SWING again to lock position |

| Button | Symbol | Main Function | |--------|--------|----------------| | Power | 🔴 / ON/OFF | Turns unit on/off | | Mode | MODE | Cycle: AUTO → COOL → DRY → HEAT → FAN | | Temp + / - | ▲ / ▼ | Set desired temperature | | Fan Speed | FAN | Cycle: AUTO → LOW → MED → HIGH | | Swing | SWING | Toggle louver movement | | Timer On | TIMER ON | Set delayed start | | Timer Off | TIMER OFF | Set delayed stop | | Turbo | TURBO | Rapid cooling/heating | | Sleep | SLEEP | Adjusts temp for night comfort | | LED | LIGHT | Turn off/on display backlight (unit) | | Follow Me | FOLLOW ME | Remote senses room temp (if supported) | zokop mini split remote control manual

This guide is for typical Zokop mini split remotes. Actual button layout may vary slightly by production year. Refer to your unit’s label for exact model number. | Problem | Likely Cause | Solution |