It has a low friction coefficient, which is essential for components subjected to constant sliding or mechanical friction.
| Property | Metric Value | Imperial Value | Test Standard | | :--- | :--- | :--- | :--- | | | 46 MPa | 6,670 psi | ASTM D638 | | Tensile Modulus | 1,500 MPa | 217 ksi | ASTM D638 | | Elongation at Break | 220% | 220% | ASTM D638 | | Flexural Modulus | 1,150 MPa | 167 ksi | ASTM D790 | | IZOD Impact (Notched) | 85 J/m | 1.6 ft-lb/in | ASTM D256 | | Heat Deflection Temp (HDT) @ 0.45 MPa | 145°C | 293°F | ASTM D648 |
. It is engineered for industrial-grade parts that require a balance of high strength, impact resistance, and thermal stability. JLC3DP +3 Key Technical Specifications Property Value Material Technology Selective Laser Sintering (SLS) Tensile Strength ~45 MPa Tensile Modulus ~1,700 MPa Heat Deflection Temp (HDT) 140°C to 179°C (dependent on load/conditions) Elongation at Break ~35% Surface Texture Grainy/Matte Color White Design Guidelines To ensure successful prints with 3301PA Nylon, follow these design standards recommended by JLC3DP and ChanHonTech : Minimum Wall Thickness
| Property | Value | | :--- | :--- | | | Polyamide 11 (Nylon 11) | | Appearance | White powder | | Particle Size (D50) | ~50-60 microns (optimized for SLS) | | Melting Point | ~186°C (367°F) | | Density (Part) | ~1.01 g/cm³ |
To successfully process 3301 PA Nylon, specific drying and molding parameters must be observed: